贵州梵净山地区震旦系微量元素特征及沉积环境   总被引：4，自引：0，他引：4  

熊国庆  王剑  胡仁发 《地球学报》2008,29(1):51-60

为了详细研究梵净山地区震旦系沉积地球化学特征及沉积环境演化,笔者对该处永义剖面自下而上进行系统采样.样品分析结果表明该处剖面稀土元素呈轻稀土(LREE)富集,重稀土(HREE)亏损,铈总体上表现为亏损,垂向上逐渐变小,铕异常发生3次波动,表明该处震旦系沉积时总体上为氧化环境,局部沉积环境发生变化.而且陡山沱组底部"碳酸盐帽"稀土元素标准化分配模式不同于冷泉碳酸盐岩分配模式,表明两者处于不同的沉积环境,成因上无关.V/Cr、Ni/Co、U/Th及V/V Ni等微量元素比值均表明震旦系沉积时为总体上氧化环境,但垂向上仍有沉积环境及水体分层性的变化.  相似文献   

被动震源进行地震勘探的可行性研究     

唐德林马文琪  胡宗正王艳伶 《中国煤炭地质》2008,20(2):46-48

为研究冲击钻机、打桩机、打夯机以及筑路机等设备工作时产生的震源,对开展工程地震勘探时的利用价值,在东庞矿2093工作面治水钻孔冲击钻进过程中进行了该项实验工作。试验采用WF-1006遥测数字地震仪及CGS-40型加速度检波器,接收排列之间方位角间隔20。,接收道数24道,道距5m,采样率1ms,记录长度2s。最近检波器距钻孔7m。利用SCHRAMM钻机产生的强大振动为被动震源,进行了250m、257m、183m、263m等不同钻井深度,以及与此相对应不同方位角（250°、250°、230°275°）的地震波接收试验。通过分析其地震记录,判定引发东庞矿矿井突水的陷落柱中心位于治水钻孔西南方向。该结论与三维地震勘探确定的陷落柱位置一致,可见通过选择合理的接收方式及参数,被动震源也能够用于地震勘探。  相似文献   

三维地震小面元采集技术在晋城矿区的应用     

张胤彬 《中国煤炭地质》2008,(6):70-72

依托“西部煤炭资源高精度三维地震勘探技术”工程,对晋城矿区进行了旨在提高小断层,小陷落柱探测能力的高密度三维地震勘探。根据面元选择因素及该区地质任务,采用5m×5m网格进行野外数据采集;考虑炮检距、方位角、覆盖次数、排列片横纵比及煤层埋深（350～500m）等因素,采用中点放炮、60道接收,24次覆盖（横向4次,纵向6次）的8线16炮束状观测系统,基岩中激发。原始资料经同一处理流程后,获得5m×5m×1ms、5m×10m×1ms、10m×10m×1ms及2.5m×2.5m×1ms不同单元的三维数据体多个,通过对比可以发现小断层,小陷落柱在其小面元叠加时间剖面、顺层切片及相干切片都有清晰的反映。实例说明,小面元采集技术可以提高对小构造的纵、横向分辨能力,满足山区对三维地震精确勘探的要求。  相似文献   

小面元三维地震勘探技术在西山屯兰矿南五采区的应用     

温建绪 《中国煤炭地质》2008,(6):73-75

屯兰矿南五采区地形复杂,最大高差达271m,地表大面积为第四系黄土覆盖,激发困难。为探索研究小面元三维地震勘探技术的应用效果。在常规三维地震勘区域内划出1km^2,采用5m×5m小面元进行采集。在地震数据采集过程中,采取了加大激发井深、提高覆盖次数、减小CMP面元网格和加大接收排列等技术措施,做到“四小三高、二中一深、两个等高面”。通过插值、抽线及扩大面元处理。获得2．5m×2．5m×1ms、5m×5m×1ms、5m×10m×1ms、10m×10m×1ms以及不同叠加次数的三维数据体。资料解释工作主要是在5m×5m×1ms、2．5m×2．5m×1ms两个数据体上进行,解释落差大于或等于5m的断层6条,落差3～5m的断层8条;查明长轴直径20～30m的陷落柱4个。30～100m的陷落柱1个,大于100m的陷落柱3个。与相邻区常规三维地震比较,小面元三维地震勘探有利于对小陷落柱、小断层的控制和解释。  相似文献   

山西天池煤矿构造特征及其形成机制     

张飞燕  姜波  韦重韬  周延召  刘磊 《中国煤炭地质》2008,(10):70-73

基于天池煤矿地质勘探资料,结合区域构造背景研究了矿井地质构造特征及形成机制。天池煤矿构造属简单构造,地层总体呈走向北东、倾向北西的单斜构造,矿井内褶皱发育程度较低,断层以正断层为主,其次为低角度逆掩断层。陷落柱分布较为杂乱,成群出现,常见于褶皱轴部。自三叠纪末期开始一直受到区域构造活动的控制作用,印支期受SN向的挤压,形成了一些近EW向的构造;燕山期经历两期NWW--SEE向挤压使井田内地层及煤层主体呈NE走向;喜山早期的NE—SW向挤压,导致NE向断层的性质发生转变;上新世开始表现为区域上的伸展作用。  相似文献   

The dynamics and thermodynamics of large ash flows   总被引：6，自引：6，他引：0  

Marcus I. Bursik  Andrew W. Woods 《Bulletin of Volcanology》1996,58(2-3):175-193

 Ash flow deposits, containing up to 1000 km³ of material, have been produced by some of the largest volcanic eruptions known. Ash flows propagate several tens of kilometres from their source vents, produce extensive blankets of ash and are able to surmount topographic barriers hundreds of metres high. We present and test a new model of the motion of such flows as they propagate over a near horizontal surface from a collapsing fountain above a volcanic vent. The model predicts that for a given eruption rate, either a slow (10–100 m/s) and deep (1000–3000 m) subcritical flow or a fast (100–200 m/s) and shallow (500–1000 m) supercritical flow may develop. Subcritical ash flows propagate with a nearly constant volume flux, whereas supercritical flows entrain air and become progressively more voluminous. The run-out distance of such ash flows is controlled largely by the mass of air mixed into the collapsing fountain, the degree of fragmentation and the associated rate of loss of material into an underlying concentrated depositional system, and the mass eruption rate. However, in supercritical flows, the continued entrainment of air exerts a further important control on the flow evolution. Model predictions show that the run-out distance decreases with the mass of air entrained into the flow. Also, the mass of ash which may ascend from the flow into a buoyant coignimbrite cloud increases as more air is entrained into the flow. As a result, supercritical ash flows typically have shorter runout distances and more ash is elutriated into the associated coignimbrite eruption columns. We also show that one-dimensional, channellized ash flows typically propagate further than their radially spreading counterparts. As a Plinian eruption proceeds, the erupted mass flux often increases, leading to column collapse and the formation of pumiceous ash flows. Near the critical conditions for eruption column collapse, the flows are shed from high fountains which entrain large quantities of air per unit mass. Our model suggests that this will lead to relatively short ash flows with much of the erupted material being elutriated into the coignimbrite column. However, if the mass flux subseqently increases, then less air per unit mass is entrained into the collapsing fountain, and progressively larger flows, which propagate further from the vent, will develop. Our model is consistent with observations of a number of pyroclastic flow deposits, including the 1912 eruption of Katmai and the 1991 eruption of Pinatubo. The model suggests that many extensive flow sheets were emplaced from eruptions with mass fluxes of 10⁹–10¹⁰ kg/s over periods of 10³–10⁵ s, and that some indicators of flow "mobility" may need to be reinterpreted. Furthermore, in accordance with observations, the model predicts that the coignimbrite eruption columns produced from such ash flows rose between 20 and 40 km. Received: 25 August 1995 / Accepted: 3 April 1996  相似文献   

Retrieval of stratospheric O3 and NO2 vertical profiles using zenith scattered light observations     

G. S. Meena  C. S. Bhosale  D. B. Jadhav 《Journal of Earth System Science》2006,115(3):333-347

Daily zenith scattered light intensity observations were carried out in the morning twilight hours using home-made UV-visible spectrometer over the tropical station Pune (18‡31′, 73‡51′) for the years 2000–2003. These observations are obtained in the spectral range 462–498 nm for the solar zenith angles (SZAs) varying from 87‡ to 91.5‡. An algorithm has been developed to retrieve vertical profiles of ozone (O₃) and nitrogen dioxide (NO₂) from ground-based measurements using the Chahine iteration method. This retrieval method has been checked using measured and recalculated slant column densities (SCDs) and they are found to be well matching. O₃ and NO₂ vertical profiles have been retrieved using a set of their air mass factors (AMFs) and SCDs measured over a range of 87–91.5‡ SZA during the morning. The vertical profiles obtained by this method are compared with Umkehr profiles and ozonesondes and they are found to be in good agreement. The bulk of the column density is found near layer 20–25 km. Daily total column densities (TCDs) of O₃ and NO₂ along with their stratospheric and tropospheric counterparts are derived using their vertical profiles for the period 2000–2003. The total column, stratospheric column and tropospheric column amounts of both trace gases are found to be maximum in summer and minimum in the winter season. Increasing trend is found in column density of NO₂ in stratospheric, tropospheric and surface layers, but no trend is observed in O₃ columns for above layers during the period 2000–2003  相似文献   

刘桥一矿陷落柱发育规律及含水性研究   总被引：3，自引：0，他引：3  

黄大兴  王永功 《中国煤田地质》2005,17(4):35-37

根据刘桥一矿1971年建井至今发现的8个陷落柱实际资料，通过对揭露陷落柱的地质、水文地质及分布特征的分析，阐述了陷落柱发育的根基所在，对陷落柱发育规律及成因进行了探讨，对于含水陷落柱的注浆封堵、留设保护煤岩柱，以及本矿矿井的深部开采都具有借鉴意义。  相似文献   

考虑轴向变形、双轴弯曲耦合效应的钢筋混凝土柱的弹塑性分析   总被引：6，自引：2，他引：6  

姬守中  江欢成 《地震工程与工程振动》2002,22(4):74-80

在实际地震作用下，高层，特别是高宽比较大的高层结构中，由于倾覆力矩的作用、柱子、特别是外边柱所受轴力的变化将不可忽略。轴向变形与双轴弯曲的耦合作用，将是柱子塑性变形的显著特征。基于材料本构关系的“纤维模型”，能较精确地反映轴向变形，双轴弯曲三者之间的耦合作用。一组钢筋混凝土柱子双轴压弯的计算结果与试验结果的比较，证明了“纤维模型”的有效性和精确性。  相似文献   

南京地区新近沉积土的动剪切模量和阻尼比的初步研究   总被引：9，自引：1，他引：9  

刘雪珠  陈国兴  胡庆兴 《地震工程与工程振动》2002,22(5):127-131

本文通过对南京地区两个工程场地漫滩相成因的砂土和淤泥质粉粘土与粉砂互层土的自振动柱试验结果进行分析，探讨了围压对剪切模量G及阻力比λ的影响，通过与Seed和Idriss建议的砂土G/Gmax-γ和λ-γ曲线变化范围的对比，认为不能简单地把淤泥质粉质粘土与粉砂层土当作砂土或粉质粘土对待。  相似文献